The dovetail joint is a traditional and dependable method for connecting the guitar body and neck. Why The Dovetail Joint Is The Best Way To Attach A Guitar Neck After carving the neck for a few days, I decided to fine tune the joint again, but only after carving the neck for a few days more. The image below depicts the joint after I’d finished the router. The bulk of the material was cut out with a dove tail bit that I used on the router. It will be necessary to use a dove tail saw to cut as much of the joint as possible. I transposed the angle onto the blank neck in the next step, using a chop saw to smooth out the rough edges. The angle between the top of the soundboard and the side where the neck joint will be held with a bevel tool was measured. If you only want to adjust the action height, you can only do so by adjusting the longitudinal curve of the soundboard at the bottom of the guitar. Because the angle of the neck joint is determined by the angle between the sound board and the sides, the fret board must be perfectly flat from the top at the nut to the end right above the sound hole for the neck joint to be perfectly aligned. The sound board thickness and the height of the strings in the nut are used to calculate the volume. The height of a fret is the distance between the top and bottom of the string. The performance of the entire guitar will be determined in large part by the quality of that joint. The scariest part of making the guitar was learning how to cut the dovetail joint. This type of joint is strong and provides a tight connection between the neck and body. The joint is made by carving a dovetail shape into the end of the neck and body, which then interlocks when the two pieces are joined together. What Is A Dovetail Joint On A Guitar?ĭovetail joints are commonly used in guitar construction to join the neck and body of the instrument. Another drawback is that the dovetail joint can be difficult to adjust if the neck needs to be reset. One is that it is more difficult to manufacture than other types of neck joints. There are a few disadvantages to the dovetail neck joint. The dovetail joint also allows the neck to be removed and replaced without damaging the body of the guitar. This is especially important on acoustic guitars, which are prone to neck movement due to the tension of the strings. They are very strong and provide good stability to the neck. Dovetail neck joints have a number of advantages over other methods of attaching the neck to the body. The two pieces are then fitted together and glued in place. The joint is made by carving a dovetail-shaped slot into the body and neck. It is one of the most common methods used for acoustic guitars. A dovetail neck joint is a type of joint used to attach the neck of a stringed instrument to the body.
0 kommentar(er)
